COMPANY NAME : POONGSAN MARU CO., LTD.
REPRESENTATIVE : LEE KWANG-IL
TEL : 02-487-3688 / FAX : 031-684-3830
E-MAIL: LEflO.OffiCE@GMAIL.COM
BUSINESS ADDRESS : 274, CHEONGBUK JUNGANG-RO, CHEONGBUK-EUP, PYEONGTAEK-SI
(SAMGYE-RI, POONGSAN MARU CO., LTD.)
BUSINESS REGISTRATION NUMBER : 402-81-27581
MONDAY TO FRIDAY : 06:00 - 18:00
LUNCH TIME : 12:00 - 01:00
CLOSED : SATURDAY, SUNDAY AND NATIONAL HOLIDAYS
COMPANY NAME : POONGSAN MARU CO., LTD.
REPRESENTATIVE : LEE KWANG-IL
TEL : 02-487-3688 / FAX : 031-684-3830
E-MAIL : LEflO.OffiCE@GMAIL.COM
BUSINESS ADDRESS : 274, CHEONGBUK JUNGANG-RO, CHEONGBUK-EUP, PYEONGTAEK-SI
(SAMGYE-RI, POONGSAN MARU CO., LTD.)
BUSINESS REGISTRATION NUMBER : 402-81-27581
MONDAY TO FRIDAY : 06:00 - 18:00
LUNCH TIME : 12:00 - 01:00
CLOSED : SATURDAY, SUNDAY AND NATIONAL HOLIDAYS
Depending on the degree of rubbing-off, the linoleum can be directly replaced or addressed by filler.
For minor damage, applying filler would be enough. But if the damage is severe, the floor should be replaced. Please contact the HQ and then you will be informed of the nearest agency to dealt with it.
But in the case of rub-off defect, there might be some cost to be borne by customer.
Due to its nature, the color may change depending on the degree of exposure to ultraviolet rays.
Especially, the colors are more likely to differ between sunny balcony area and the kitchen inside where the sun is less likely to come in. But this color variation is natural, so don't worry about that.
However, areas with high moisture exposure such as kitchen sink or the part in front of bathroom may be severely discolored due to continuous moisture exposure. You need to pay special attention to maintenance.
In addition, discoloration may occur due to floor leakage or balcony condensation. But in this case ,t the cause must be repaired first before the floor is repaired.
You can submit the product to the agency that requested construction.
The agent in charge determines the type of defect, and in the case of material defects, our headquarters handles the A/S directly.
The cause may vary. For example, it could be due to product defects, incompliance of curing time (24 hours) for adhesive after construction work, being worn off by friction with heavy product's, overall rift, etc. The exact cause should be diagnosed by constructor and experts.
That happens when the plastering work was not done in equilibrium.
Before construction, we do our efforts to ensure equilibrium such as removing any noticeable protrusions with a chisel, and filling in the dents with a correction agent, etc. However, perfect equilibrium cannot be assured. It is very hard. So this problem cannot be simply attribute to the product defects.
The defect repair method is to drill a hole in the center of the bending point, inject an appropriate amount of repair glue with a syringe, repair it with a sawdust or toothpick, and then repair it by pressing it with a heavy object for about a day
Yes, you can clean it with a wet mop. It's true that wood is vulnerable to moisture, but it's okay if you clean it with a tightly woven mop.
Due to the nature of wood, the color changes with exposure to ultraviolet rays.
So, if you leave certain part with carpet for a long time, its color will look different from that of other parts.
Also, carpets can interfere with moisture evaporation, which can shorten the life of the floor.
If you must lay the carpet, you'd better skim every two days to let the part exposed to the ultraviolet rays, so that the aforementioned side-effect can be prevented
Every product we use has a different product life depending on maintenance.
If the external environment is stable, on average, it can be used up to 10 years. And if you manage it well, you can use it longer than that.
Floor coating after construction is not recommended because it may cause defects.
We made the product more durable and beautiful through solid self-coating when we released the product.
Its use deforms wood due to moisture and high heat, and shortens the life of the floor.